PROACTIVE ENVIRONMENTAL PRODUCTS®
ABYSS LD WITH BOOSTER
Free up your time! Free up your mind!
Proactive® Liquid Detection (LD) Sensor Autonomous Pump Control Technology!
Set it and Forget it!
Weatherproof Abyss LD with Booster doubles the Abyss® Series Pump Line purge rate and offers autonomous pump operation with Liquid Detection Sensor (LD) and Tank Float Switch Technologies!
Powered by a 12 volt dc battery or 12 volt dc battery bank
The Abyss LD with Booster is designed exclusively for
Proactive Environmental Products® Abyss Series Pump Line:
If you plan to power the Proactive® Abyss® or Abyss® Slimline pumps with other means of energy and/or desire a timer please contact us to discuss the full line of Proactive® Autonomous Pump Control System options for solar, AC/DC transformers, or gas generator.
Applications of the Abyss LD with Booster: When using the Abyss® or Abyss Slimline pumps include, but not limited to:
24/7 stationed applications in groundwater, surface water, vaults or the like for: Pump Tests, Long or Short Term Purge Monitoring, Remediation, Liquid Transfer, Remote Groundwater and Surface Water Monitoring, and Hydrocarbon Recovery [LNAPL/DNAPL]
Abyss LD with Booster provides double the purge rate and offers flexible product features. If you appreciate options, you will be pleased to know you can select from any one, or all of the Abyss LD with Booster features!
Option #1: LD Sensor Detection and Dry Run Detection Feature
The LD sensor detects (conductive) liquid*. The pump will run as long as the LD sensor is suspended in liquid. When liquid draws down below the LD sensor, the dry run sensor takes over and transmits a signal to the Abyss LD with Booster to shut-off the pump. As liquid level rises again covering the LD sensor, the LD sensor takes over and transmits a signal to the Abyss LD with Booster to turn-on the pump.
Option #2: Tank Float Switch Feature
The tank float senses the full-set-point you assigned upon tank float switch deployment. The tank float switch transmits a signal to the Abyss LD with Booster to shut-off the pump and keeps the pump off until the tank reservoir drops to your specified level.
Option #3: Incorporate Both Autonomous Features
The LD and Dry Run Detection Sensors and Tank Float Switch
NOTE: While the Abyss LD with Booster is weatherproof, it’s helpful to mount the unit 3+ feet above the ground surface and in a shaded area to avoid direct sunlight.
Abyss LD with Booster
The Ultimate Controller In Liquid Sensor Technology
Configure The Abyss LD With Booster The Way You Want It!
LIQUID DETECTION SENSOR
DRY RUN SENSOR
TANK FLOAT SWITCH
PUMP CONNECTION WIRES
ABYSS LD WITH BOOSTER
The most economical and simple solution to autonomous pump control
Provides Peace of Mind by managing the pump so you don't have to
Improves time management! Literally set the Abyss LD with Booster with pump and forget it
Save money! Eliminate archaic, bulky & expensive equipment
User-friendly install takes roughly 15 minutes to setup
Look like a PRO when your clients see how much money you save them by deploying Proactive® autonomous pump control technology
One time setup
Same pump settings upon restart every on/off cycle or from power outage
Flexibility to choose the options that will get the job done accurately, faster, and under budget
Ideal for off-the-grid projects
Ideal for remote sites without AC power
Lightweight and easy to mount
Runs directly from a 12 volt dc battery or 12 volt dc battery bank
Designed for the outdoors incorporating a weatherproof enclosure
Warranty: Manufacturer 6 months parts and labor warranty
Abyss LD with Booster comes with:
Weatherproof enclosure provides long life and protection to the components
Built-in Booster doubles the Abyss® Series Pump Line flow rate
Liquid Detection Sensor and Dry Run Sensor probes come with:
○ 300 feet of wire per sensor spooled onto reel
Tank Float Switch comes with 3 feet of wire (additional wire can be purchased upon request)
Two water-proof wire connector nuts