top of page

PROACTIVE ENVIRONMENTAL PRODUCTS®

PRO SOLAR CHARGER #1

 

Maximize Your Solar Power!

 

Set it and Forget it!

Weatherproof Pro Solar Charger #1 Delivers Autonomous Pump Control with Variable Flow to Low Flow Control, and Proactive® Liquid Detection Sensor (LD), Multiple Settings Timer, 

and Tank Float Switch Technologies

PNG LOW RES PROACTIVE BURST AUTONOMOUS

Item# PAPOS-14075

Pro Solar Charger #1 (5.7.2021).png

SOLAR CHARGER 

DIAL

BREAKER

BREAKER #1

LIQUID DETECTOR 
SENSOR PROBE

LOW FLOW CONTROLLER

GREY
TERMINAL BAR

TIMER

DRY

SENSOR PROBE

 EXTERNAL FLOAT

The Pro Solar Charger #1 is compatible with the

Proactive Environmental Products® pumps listed below:

 

Abyss® and Abyss® Slimline pumps

Poseidon® 60 and Poseidon® 80 pumps

Frontier® 60 and Frontier® 80 pumps

SS Mini Monsoon® XL 60 and SS Mini Monsoon® XL 80 pumps

 

If you plan to power the Proactive® brand pumps listed above with other means of energy, please contact us to discuss the full line of Proactive® Autonomous Pump Control System options for: Solar Direct, 110/220 AC to 12 volt DC output, 12 volt DC battery / 12 volt DC battery bank, or gas generator. For your convenience, videos referencing Selecting Power and Autonomous Setup are available for all pumps listed above on our website.

 

Applications of the Pro Solar Charger #1: When using the Abyss®, Poseidon® 60 and 80, and SS Mini Monsoon® XL 60 and 80 series pump lines include, but not limited to:

24/7 stationed applications in groundwater, surface water, vaults or the like for: Pump Tests, Long or Short Term Purge, Remediation, Liquid Transfer, Groundwater and Surface Water Monitoring

 

Applications of the Pro Solar Charger #1: When using the Abyss® and SS Mini Monsoon® XL 60 and 80 series pump lines include, but not limited to:

24/7 stationed applications in groundwater, surface water, vaults or the like for: Pump Tests, Long or Short Term Purge, Remediation, Liquid Transfer, Groundwater and Surface Water Monitoring, Hydrocarbon Recovery [LNAPL/DNAPL]

 

Applications of the Pro Solar Charger #1: When using the Frontier® 60 and 80 series pump lines

Stationed application for cabin use or remote off the grid recreational use

PRO Solar Charger #1 

The Ultimate Solar Powered Pump Control with Liquid Detection Sensor Technology

Configure the PRO Solar Charger #1 the Way You Want It! 

PRO Solar Charger #1 provides flexible product features. If you appreciate options (the good news all options are included with the product), you will be pleased to know you can select from any or all of the PRO Solar Charger #1 features!

​

Option #1: LD Sensor Detection and Dry Run Detection Feature

The LD sensor detects (conductive) liquid*. The pump will run as long as the LD sensor is suspended in liquid. When liquid draws down below the LD sensor, the dry run sensor transmits a signal to the Pro Solar Charger #1 to shut-off the pump. As liquid level rises again covering the LD sensor, the LD sensor takes over and transmits a signal to the Pro Solar Charger #1 to turn on the pump. This pumping cycle continues automatically.

 

Option #2: Tank Float Switch Feature

This feature prevents tank over-fill and provides control over the desired total volume of liquid that enters the tank. The tank float switch transmits a signal to the Pro Solar Charger #1 to shut-off the pump when it detects the full or desired set point (assigned during tank float switch deployment). The pump remains off until the tank reservoir drops to tank float switch set point, triggering the tank float switch to transmit a signal to the Pro Solar Charger #1 to turn on the pump again. This pumping cycle occurs automatically.

 

Option #3: Multiple Settings Timer Feature

The Pro Solar Charger #1 timer provides up to 19 pumping cycles within a 24 hour period, delivering total autonomous pump run times and control over pump run time duration. This pumping cycle occurs automatically.

 

Option #4: Variable Flow with Low Flow Control Feature

Incorporating this feature provides adjustable flow rate control for a continual and consistent liquid discharge which is ideal for low-yielding wells, vaults, or fluctuating water levels in surface water.

 

Option #5: Incorporate all Features

The Variable Flow Rate with Low Flow Control, LD and Dry Run Detection Sensors, Tank Float Switch and Multiple on/off Interval Timer Settings provide the ultimate experience in autonomous pump control available!

​

Absolute Pump Control ~ you're going to love the way you work!

Benefits:

Proactive® Intelligent 80 Amp Solar Charger

  • Ideal for remote sites

  • Designed for the Poseidon®, SS Mini Monsoon® XL,  and Frontier® 60 and 80 pump series, as well as the Abyss® pump series

  • Incorporated into the most economical, intuitive, and simple to use solar-powered autonomous pump control on the market

  • Improves time management! Literally set the Proactive® 80 Amp Solar Charger and autonomous settings with pump and forget it

  • Saves money by eliminating archaic, bulky, and expensive equipment

  • Reduces carbon footprints

Benefits:

Proactive® LD and Dry Run Sensor Autonomous Pump Control 

  • Use of the LD with Dry Run autonomous pump control sensors manages pump operation so you don’t have to

  • Reliable LD Sensor runs the pump only when liquid is present* 

  • Same pump flow rate recognition through autonomous pumping cycles  

  • Flexibility to choose the autonomous options that will get the job done accurately, faster, and under budget

  • Additional and customized LD and Dry Run Sensor wire length is available upon request at time of order

  • User-friendly, one-time simple setup

  • Look like a PRO when your clients see how much money you save them by deploying Pro Solar Charger #1 with Proactive® Autonomous Pump Control Technologies

Benefits:

Proactive® Tank Float Switch Autonomous Pump Control 

  • Ideal pump management when transferring liquid to a tank

  • Prevents tank over-fill 

  • Provides control over the desired total volume of liquid that enters the tank 

  • Same pump flow rate recognition through autonomous pumping cycles

  • Provides peace of mind knowing that the tank float switch will mind the pumping operation so you don't have to

  • User-friendly, one-time simple setup

Benefits:

Proactive® 38 Multiple Settings Timer Autonomous Pump Control 

  • Provides ultimate pump management!

  • Using the timer settings feature controls the pump run times and duration of pump run time

  • Offers up to 19 reliable pumping cycles within a 24 hour period

  • Gives you control over how long the pump will run for during each pumping cycle 

  • Proven to be most effective for autonomous pump control when coupled with Proactive® LD Sensor technology

  • Same pump flow rate recognition through each autonomous pumping cycle

  • Controlled pumping cycles may extend pump life

  • User-friendly, one-time simple setup

Benefits:

Proactive® Variable Flow to Low Flow Pump Control

  • Ideal for short and long-term groundwater purge and pump tests with the desired flow rate

  • Offers adjustable flow rate for a continual and consistent flow

  • Ideal for low flow control with low-yielding wells, vaults, and other low-yielding applications

  • Capable of reducing flow to 10 mLs per minute when used in conjunction with Proactive® low Flow Valve (Proactive® low flow valve is sold separately)

  • Controlled flow rate reduces the amount of pump cycles and may prolong pump life

  • May reduces well stress

  • Same pump flow rate recognition through pumping cycles

Features:

Proactive® Intelligent 80 Amp Solar Charger

  • Proactive® Solar charger handles up to 80 amps input allowing for a large solar panel array

  • Intelligent Proactive® 80 Amp Solar Charger identifies and auto adjusts to 12 or 24-volt solar panels (this means you do not need a 24 to 12-volt step-down unit!)

  • Easy-to-read LCD Display

  • User-friendly operation interface

  • State-of-the-art Pulse Width Modulation (PWM) is incorporated, providing reliable, effective, and consistent charging

  • Intelligent battery reverse discharge protection

  • Intelligent battery reverse polarity protection 

  • Low Voltage Disconnect (LVD) battery protection 

  • Intelligent overload feature with short circuit protection

  • Intelligent automatic temperature compensation

  • Provides consistent amp and 12 volt DC output to the pump for consistent flow rate

  • User-friendly, one-time simple setup 

  • Incorporated into a weatherproof enclosure

Features:

Proactive® LD and Dry Run Sensor Autonomous Pump Control 

  • Provides autonomous pump management

  • The pump will run as long as the LD sensor is suspended in liquid*. When liquid draws down below the LD sensor, the dry run sensor transmits a signal to the Pro Solar Charger #1 to shut-off the pump

  • As liquid level rises again covering the LD sensor, the LD sensor takes over and transmits a signal to the Pro Solar Charger #1 to turn on the pump

  • This pumping cycle continues automatically

  • Same pump flow rate recognition through each autonomous pumping cycle

  • Purposefully sleek and narrow LD and Dry Run Sensor wires and probes designed to accommodate both the pump and sensors in 2” and larger diameters wells

  • LD Sensor probes also serve as wire weights

  • User-friendly, one-time simple setup

Features:

Proactive® Tank Float Switch Autonomous Pump Control 

  • Provides tank overfill protection

  • The tank float switch transmits a signal to the Pro Solar Charger #1 to shut-off the pump when it detects the full or desired set point (assigned during tank float switch deployment) 

  • The pump remains off until the tank reservoir drops to tank float switch set point, triggering the tank float switch to transmit a signal to the Pro Solar Charger #1 to turn on the pump

  • The pumping cycle continues automatically

  • Same pump flow rate recognition through each autonomous pumping cycle

  • Increased effectiveness when used in conjunction with LD and Dry Run Sensor technology

  • Can be deployed in tank or vault long distances from power supply with added wire

  • Tank float switch comes with 3 feet of wire. Additional wire is available (sold by the foot upon the time of order)

  • User-friendly, one-time simple setup

Features:

Proactive® 38 Multiple Settings Timer Autonomous Pump Control 

  • Sophisticated yet easy to program timer provides 19 reliable pumping cycle settings within a 24 hour period

  • Delivers control over the duration of pump run time per pumping cycle

  • Pumping cycles occur automatically

  • Same pump flow rate recognition through each autonomous pumping cycle

  • Controlled pumping cycles may extend pump life

  • Using the multiple settings timer feature may reduce well stress 

  • Increased effectiveness when used in conjunction with LD and Dry Run Sensor technology

  • Easy to read LCD lit display

  • User-friendly, one-time simple setup

Features:

Proactive® Variable Flow to Low Flow Pump Control

  • A simple turn of the rheostat provides variable flow to low flow control

  • Capable of reducing flow to 10 mLs per minute when used in conjunction with Proactive® low Flow Valve (Please do not valve pump without the use of a low flow control feature)

  • Providing variable flow balances well recovery to pump purge rate

  • Controlled flow may reduce the amount of pumping cycles, ergo prolonging pump life

  • Controlled flow may reduce well stress

  • User-friendly, one-time simple setup

Pro Solar Charger #1 comes with:

  • The weatherproof enclosure provides long life and protection to the components

  • 80 amp Solar Charger

  • Built-in Variable Flow and Low Flow Controller

  • Built-in Multiple Settings Timer

  • Built-in 30 amp breakers

  • Liquid Detection Sensor and Dry Run Sensor come with:

          â—‹  300 feet of wire per sensor spooled onto the reel

  • Tank Float Switch comes with 3 feet of wire (additional wire can be purchased upon request at time of order)  

  • Tamper-Proof lock for peace-of-mind

  • Mounting Brackets 

  • Warranty: Manufacturer 6 months parts and labor warranty

Specifications:

​

DC VOLT MAX:                                     12-24V

MAXIMUM AMP OUTPUT:                    25 AMPS

MAXIMUM AMP INPUT:                       80 AMPS

DEPTH MEASUREMENT:                        8"

WIDTH MEASUREMENT:                       17" 

HEIGHT MEASUREMENT:                       21"

WEIGHT:                                              19 POUNDS   

BREAKERS:                                           30 AMP 

ENCLOSURE RATED:                              WEATHERPROOF

​​

Note: Product dimensions are inclusive of the Pro Solar Charger #1 NOT inclusive of the sensors, reels, or tank float switch. 

​​

* Liquid must contain minerals in order to use the LD sensor

bottom of page